Garage Floor Epoxy

Garage floor epoxy is often sold in kits which include the epoxy itself, the etching solution and color chips, instructions, and a protective sealant. Some kits also come with an instructional DVD, so you can learn how to apply the garage floor paint in your home. Color choices are usually quite limited, since so many coatings are just white, gray, or black. The epoxy will look like paint but it isn't, so the best thing to do is let the professional do it.garage floor epoxy


There are a couple of ways to apply epoxy garage floor paint to a concrete floor. One way is to first apply the protective sealant, then paint. AllStar Concrete Coatings


I have used both methods for preparing my garage floor before applying the epoxy. A good quality garage floor protection is required, because the garage floor is exposed to moisture and oil on a regular basis. It should not contain ingredients like petrolatum or mineral oil, which can harm the garage floor if they're too much.


Using a power washer to remove old flooring makes it easy to prepare the garage floor for the epoxy. The next step in preparation is the application of the garage sealer, followed by the application of the garage floor paint. Make sure you have no scratches in the sealant before applying the paint, because the sealant will be attracted to any imperfections in the flooring, and it will cause the sealant to start bubbling.


The final step in preparing the garage floor for the epoxy is to clean it thoroughly to remove any dust, dirt, or grime. This cleaning step should also be performed after the floor is completely dry and it has dried completely.


You can apply the garage floor paint directly on the garage floor or you can apply the sealant first, and then paint. When using the first method, make sure you apply the sealant to all exposed parts of the floor, but not the middle or back part of the flooring, because the sealant will cause the paint to flake off easily. After you've applied the sealant, it's time to paint!


As I said before, it's best to use a brush when applying the paint, as the brush is easier on the garage floor. For a smooth, even finish, you can use a roller. If the floor is wet, you can use a roller with a rag underneath to keep the flooring from rubbing against the roller.


After the floor is fully dry, sand and polish the floor with a fine-grit sandpaper to make it shiny. Then wax and finish the floor using a spray-on car wax to give it a new sheen.


Once you're done with the floor, you need to vacuum up any excess dirt or debris that might have remained on the garage floor, before you can begin the restoration process. Make sure that the flooring has been completely dry, and you do not have any leaks before you start the restoration.


To restore the garage floor paint, you can simply scrape the floor with a scraper and wipe it off. You can use an air compressor to speed up this procedure. If you have a lot of concrete, you can try using sandpaper or your car's transmission to remove the concrete. And use it to seal the floor.


If you use sandpaper, be careful to make sure that you only scrape the flooring. In the proper direction. If you do happen to do any damage to the floor, you should consult with a professional and have them restore the floor instead of attempting to correct it yourself.


If you decide to do the restoration yourself, make sure to follow the directions carefully so as to not damage the floor paint. This is one of the simplest projects you can do to restore your garage floor, since there are no complicated techniques involved.

15511 Highway 71 West Bee Cave, TX 78738

Our Slideshow


Watch This